|
Timers
| SAFETY GAS TIMERS | |||
|
ADVANTAGES: |
|||
| 1 - increased SAFETY : switch GAS OFF at the end of the running times to prevent any accident caused by fire. Safety STOP | |||
| 2 - increased FREE TIME : you must not remember to switch gas off because SAFETY timers do it. | |||
| 3 - ELECTRCITY : no power failure problem. | |||
|
|
|
|
| Standard features |  |
MT - MTS 59 | |
IT - ITS 57 | |
GT |
|
||||||
| 1. running times | |
30' - 45' - 60' - 90' - 100' - 120' | |
15' - 20' - 30' - 60' - 90' - 120' | |
60' - 90' |
|
||||||
| 2. number of poles | |
on request: 1 or 2 poles | |
on request: 1 or 2 poles | |
1 pole |
|
||||||
| 3. OPTIONAL | |
switching wheel setting "continuously ON" or "continuously OFF" as desired |
|
|
||
|
||||||
| 4. acoustic signal | |
Gong: optional | |
Long Ring 2.5 sec: optional | |
Long Ring 2.5 sec |
|
||||||
| 5. operating temperature | |
T 125ºC | |
T 125ºC | |
T 125ºC |
|
||||||
| 6. shaft diameter | |
5-6-7 mm | |
5-6-7 mm | |
5-6-7 mm |
|
||||||
| 7. shaft length | |
on request | |
on request | |
on request |
|
||||||
| 8. shaft milling | |
on request | |
on request | |
on request |
|
||||||
| 9. shaft position | |
on request | |
on request | |
on request |
|
||||||
|
10. dimensions (mm) with acoustic signal |
|
43 x 58.5 x 52 | |
diameter: 59 thickness:43.8 |
|
57 x 53.6 x 35.4 |
|
||||||
|
11. dimensions (mm) without acoustic signal |
|
43 x 58.5 x 33.6 | |
51 x 56 x 38 | |
|
|
||||||
| 12. life cycles | |
10.000 | |
10.000 | |
10.000 |
|
||||||
| 13. AQL | |
0,65 | |
0,65 | |
0,65 |
|
||||||
| 14. accuracy | |
±3% | |
±3% | |
±3% |
|
||||||
| 15. load current | |
10(2)A 400Vac T 125ºC ENEC 03 16(3)A 250Vac T 125ºC ENEC 03 13(2)A 250Vac T 110ºC UL-CSA 15(2)A 120 Vac T 110ºC UL 15(4)A 120 Vac T 85ºC UL |
|
16(3)A 250Vac T 125ºC ENEC 03 IT(1/4hp)120-240 Vac |
|
|
|
||||||
|
16. microswitch operating rate |
|
|
|
|
|
0,1A 30Vdc - 125Vac |
|
||||||
|
17. microswitch electric life |
|
|
|
|
|
20.000 switching |
|
||||||
| 18. conformity with | |
EN 60730-2-1 | |
EN 60730-2-1 | |
EN 60730-2-1 |
|
||||||
| 19. APPROVALS | |
ENEC 03 - UL - CSA | |
ENEC 03 - UL - CSA | |
ENEC 03 - UL |
|
||||||